Australia's Biggest Online Irrigation Megastore!
Call us on 1800 244 389 or contact us here
DIY Irrigation

How to: Program Your Hunter X-Core Controller

Having trouble with your Hunter X-Core? Not sure where to start with programming your zones? Let us show you how with a simple step-by-step.

The first step to programming your Hunter X-Core Controller is to set the date and time by following these steps.

  1. Turn the dial to the CURRENT TIME/DAY position.
  2. The current year will be flashing.  Use the (+) or minus (-) buttons to change the year.  Once completed the right arrow (>) to procced to set the month and day.
  3. Press the right arrow again and now the AM, PM will be flashing.  Use the buttons to select AM, PM or 24 hour.  Once complete use the buttons to move to hours, minutes etc.

SETTING STATION START TIMES:

Step 1Step 2Step 3Step 4

 

IMPORTANT: In the Start Times dial position, the numbers 1-4 do not represent stations.  The numbers represent the program start times.  Each program can start up to 4 times on the set days to water.  One start time will activate all stations sequentially in that program.  If you want the stations to operate one time in sequential order and then not repeat, set start times 2, 3, and 4 to OFF.  Multiple start times in a program can be used for separate morning, afternoon  or evening watering cycles.  Start times maybe entered in any order.  The X-Core will automatically sort them.

 

programming a x core controller

EXAMPLE: 

Program A has four stations (1-4) assigned to it and the program has only one start time set for 5:30AM.  At 5:30AM, station 1 will water for the allocated run time, followed by station 2 for its allocate run time and so on until all four stations have completed.  Start times should appear as you see in the chart to the left.

Individual stations are assigned to a program (A, B, C). Each program requires only one start time to initiate a watering sequence of all the stations assigned to that program.  Start times are assigned to programs, not stations.  The controller will operate the stations in numerical order.  When a station has completed its watering time, the controller will switch to the next station in that program automatically. 

FLOWPRO TIP:

It is important to utilise all three programs if you have multiple stations. Lets look at the previous example. You have 2 different stations running pop up sprinklers for your lawn, 1 station running dripline in your garden bed and the final station running sprayers in another garden bed. 

All three of these applications require different amounts of watering maintenance. You may only want to run your lawns once a week at 5:30AM, yet you may want your dripline running up to 3 times a week for 20 minutes each time, and your sprayers about 3 times a week, but only for 10 minutes each time. 

By setting up all 3 programs and having different stations allocated to each program, you'll be able to utilise the full capability of the Hunter X-Core Controller and control your watering down to the minute.

programming a x core controller

ELIMINATING A PROGRAM START TIME:

With the dial set to START TIMES position, push the plus (+) or minus (-) button until you reach 12.00AM (Midnight).  From here push the minus (-) once to reach the OFF position.  The OFF position is between 11:45PM and 12:00AM.

 

SETTING STATION RUN TIMES:

Step 1Step 2Step 3Step 4

SETTING SPECIFIC DAYS OF THE WEEK TO WATER:

  1. Turn the dial to the WATER DAYS position.
  2. The display will show the last program selected (A, B, or C).  You can switch to another program by pressing the PRG button.  The display will show either a flashing symbol above "MO" or "MO" will be flashing.
  3. Each day will have a water droplet icon above it, this icon represents an "on" day.
  4. With the icon flashing above a specific day, press the plus (+) or minus (-) buttons to select the day to water.
  5. Press the minus (-) button to cancel the watering for that day.
  6. Press the plus (+) or minus (-) buttons again to go to the next day and repeat until all days are complete.

Was this article helpful?


Comments 0

Leave a comment

Your First Name*
Your email*
Additional comments *

Related articles

Related products

Free design consultation services

  • Expert advice and qualified technical support
  • High quality, professionally designed irrigation plan
  • Full quotation and recommendation of system components
  • No-fuss returns & warranty resolutions
More info

Why Shop with us?

  • Free Shipping Australia Wide
  • Friendly, Expert Customer Support
  • Great Prices & The Best Range

Your Order

Item code:
Enter a quantity below
- +
You don't have any items in your cart.
Total