- Home
- Bianco Auto Start Pump Control
{"id":4507842936943,"title":"Bianco Auto Start Pump Control","handle":"auto-restart-pressure-controller","description":"\u003cp\u003eThe White International WHI-SK20PPHS2 controllers are devices used to control electric 240V pumps of 1.5kW or less.\u003c\/p\u003e\n\u003cp\u003eThe controller monitors both the pressure and the flow. It controls the operation of the pump automatically. Because of its design, there is no need for a separate pressure (expansion) tank, nor is there any need to adjust start and stop pressures as per traditional pressure switches.\u003c\/p\u003e\n\u003cp\u003eThe unit will protect the pump should the water supply fail (due to blockage in the pipe or tank running dry) and will automatically restart normal operation once water is restored.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStarts and stops the pump automatically when the tap is open or closed. This means the pump does not need to be turned off manually.\u003c\/li\u003e\n\u003cli\u003eMaintains a constant pressure from the pump during operation resulting in a reliable water supply.\u003c\/li\u003e\n\u003cli\u003eAutomatically stops the pump in the situation of no flow (due to inlet pump blockage) and will automatically resume normal operation once the blockage is removed.\u003c\/li\u003e\n\u003cli\u003eAutomatically restarts the pump in the event of power failure. This gives the homeowner peace of mind that the unit will continue to operate even if they are away for a long period of time.\u003c\/li\u003e\n\u003cli\u003eThe controller eliminates pressure fluctuations at flows as low as 1L\/min.\u003c\/li\u003e\n\u003cli\u003ePlug and play leads (IEC type) are installed on the controller so that a licensed electrician is not required to replace the controller.\u003c\/li\u003e\n\u003cli\u003eThe controller incorporates an inbuilt pressure gauge to enable the homeowner to monitor the system pressure without the need of a separate inline pressure gauge. The pressure gauge can also diagnose nuisance upstream water.\u003c\/li\u003e\n\u003cli\u003eDrinking water AS\/NZS4020 approved in Australia and New Zealand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"cv-table-1\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"cv-table-row-0\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003eInlet\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e1\" BSP male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-1\"\u003e\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-2\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003eOutlet\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e1\" BSP male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-3\"\u003e\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-4\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003eBuilt in non-return valve\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-5\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003eNo flow\/loss of prime protection\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-6\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003eManual start switch (RESET)\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-7\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003eVoltage LED (GREEN power on light)\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-8\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003ePump working LED (ORANGE pump on light)\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-9\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003eNo flow LED (RED failure light)\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-10\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003e1.5 metre lead and 3 pin Australian\/New Zealand plug\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-11\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003e0.6 metre pump power lead, plug and play\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-12\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003eInbuilt 10 bar pressure gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2020-07-14T10:59:45+10:00","created_at":"2020-07-14T10:59:43+10:00","vendor":"White International","type":"Pressure Controller","tags":["Accessory Type_Pressure Controller"],"price":18304,"price_min":18304,"price_max":18304,"available":true,"price_varies":false,"compare_at_price":27443,"compare_at_price_min":27443,"compare_at_price_max":29304,"compare_at_price_varies":true,"variants":[{"id":31869770334319,"title":"WHI-SK20PPHS2 AUTO PUMP PRESSURE CONTROLLER 2.2 BAR START PRESSURE","option1":"WHI-SK20PPHS2 AUTO PUMP PRESSURE CONTROLLER 2.2 BAR START PRESSURE","option2":null,"option3":null,"sku":"711942","requires_shipping":true,"taxable":true,"featured_image":{"id":28004041064559,"product_id":4507842936943,"position":1,"created_at":"2021-03-08T14:31:00+11:00","updated_at":"2021-06-16T16:30:10+10:00","alt":null,"width":1000,"height":1000,"src":"\/\/duralirrigation.com.au\/cdn\/shop\/products\/711942_1000x_ea8e58e6-5f31-4673-be33-0a36a338f9a1.png?v=1623825010","variant_ids":[31869770334319]},"available":true,"name":"Bianco Auto Start Pump Control - WHI-SK20PPHS2 AUTO PUMP PRESSURE CONTROLLER 2.2 BAR START PRESSURE","public_title":"WHI-SK20PPHS2 AUTO PUMP PRESSURE CONTROLLER 2.2 BAR START PRESSURE","options":["WHI-SK20PPHS2 AUTO PUMP PRESSURE CONTROLLER 2.2 BAR START PRESSURE"],"price":18304,"weight":0,"compare_at_price":27443,"inventory_quantity":-14,"inventory_management":null,"inventory_policy":"deny","barcode":"","featured_media":{"alt":null,"id":20262188417135,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/duralirrigation.com.au\/cdn\/shop\/products\/711942_1000x_ea8e58e6-5f31-4673-be33-0a36a338f9a1.png?v=1623825010"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39819717935215,"title":"WHI-SK10PPHS2 AUTO PUMP PRESSURE CONTROLLER 1.5 BAR START PRESSURE","option1":"WHI-SK10PPHS2 AUTO PUMP PRESSURE CONTROLLER 1.5 BAR START PRESSURE","option2":null,"option3":null,"sku":"711941","requires_shipping":true,"taxable":true,"featured_image":{"id":29867569905775,"product_id":4507842936943,"position":2,"created_at":"2021-06-16T16:30:10+10:00","updated_at":"2021-06-16T16:30:10+10:00","alt":null,"width":1000,"height":1000,"src":"\/\/duralirrigation.com.au\/cdn\/shop\/products\/711941_1000x_df2dcf82-ffd9-4f7c-927a-e18fc62dabae.jpg?v=1623825010","variant_ids":[39819717935215]},"available":true,"name":"Bianco Auto Start Pump Control - WHI-SK10PPHS2 AUTO PUMP PRESSURE CONTROLLER 1.5 BAR START PRESSURE","public_title":"WHI-SK10PPHS2 AUTO PUMP PRESSURE CONTROLLER 1.5 BAR START PRESSURE","options":["WHI-SK10PPHS2 AUTO PUMP PRESSURE CONTROLLER 1.5 BAR START PRESSURE"],"price":18304,"weight":0,"compare_at_price":29304,"inventory_quantity":-14,"inventory_management":null,"inventory_policy":"deny","barcode":"","featured_media":{"alt":null,"id":22125728137327,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/duralirrigation.com.au\/cdn\/shop\/products\/711941_1000x_df2dcf82-ffd9-4f7c-927a-e18fc62dabae.jpg?v=1623825010"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/duralirrigation.com.au\/cdn\/shop\/products\/711942_1000x_ea8e58e6-5f31-4673-be33-0a36a338f9a1.png?v=1623825010","\/\/duralirrigation.com.au\/cdn\/shop\/products\/711941_1000x_df2dcf82-ffd9-4f7c-927a-e18fc62dabae.jpg?v=1623825010"],"featured_image":"\/\/duralirrigation.com.au\/cdn\/shop\/products\/711942_1000x_ea8e58e6-5f31-4673-be33-0a36a338f9a1.png?v=1623825010","options":["Model"],"media":[{"alt":null,"id":20262188417135,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/duralirrigation.com.au\/cdn\/shop\/products\/711942_1000x_ea8e58e6-5f31-4673-be33-0a36a338f9a1.png?v=1623825010"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/duralirrigation.com.au\/cdn\/shop\/products\/711942_1000x_ea8e58e6-5f31-4673-be33-0a36a338f9a1.png?v=1623825010","width":1000},{"alt":null,"id":22125728137327,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/duralirrigation.com.au\/cdn\/shop\/products\/711941_1000x_df2dcf82-ffd9-4f7c-927a-e18fc62dabae.jpg?v=1623825010"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/duralirrigation.com.au\/cdn\/shop\/products\/711941_1000x_df2dcf82-ffd9-4f7c-927a-e18fc62dabae.jpg?v=1623825010","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe White International WHI-SK20PPHS2 controllers are devices used to control electric 240V pumps of 1.5kW or less.\u003c\/p\u003e\n\u003cp\u003eThe controller monitors both the pressure and the flow. It controls the operation of the pump automatically. Because of its design, there is no need for a separate pressure (expansion) tank, nor is there any need to adjust start and stop pressures as per traditional pressure switches.\u003c\/p\u003e\n\u003cp\u003eThe unit will protect the pump should the water supply fail (due to blockage in the pipe or tank running dry) and will automatically restart normal operation once water is restored.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStarts and stops the pump automatically when the tap is open or closed. This means the pump does not need to be turned off manually.\u003c\/li\u003e\n\u003cli\u003eMaintains a constant pressure from the pump during operation resulting in a reliable water supply.\u003c\/li\u003e\n\u003cli\u003eAutomatically stops the pump in the situation of no flow (due to inlet pump blockage) and will automatically resume normal operation once the blockage is removed.\u003c\/li\u003e\n\u003cli\u003eAutomatically restarts the pump in the event of power failure. This gives the homeowner peace of mind that the unit will continue to operate even if they are away for a long period of time.\u003c\/li\u003e\n\u003cli\u003eThe controller eliminates pressure fluctuations at flows as low as 1L\/min.\u003c\/li\u003e\n\u003cli\u003ePlug and play leads (IEC type) are installed on the controller so that a licensed electrician is not required to replace the controller.\u003c\/li\u003e\n\u003cli\u003eThe controller incorporates an inbuilt pressure gauge to enable the homeowner to monitor the system pressure without the need of a separate inline pressure gauge. The pressure gauge can also diagnose nuisance upstream water.\u003c\/li\u003e\n\u003cli\u003eDrinking water AS\/NZS4020 approved in Australia and New Zealand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"cv-table-1\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"cv-table-row-0\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003eInlet\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e1\" BSP male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-1\"\u003e\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-2\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003eOutlet\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e1\" BSP male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-3\"\u003e\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-4\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003eBuilt in non-return valve\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-5\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003eNo flow\/loss of prime protection\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-6\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003eManual start switch (RESET)\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-7\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003eVoltage LED (GREEN power on light)\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-8\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003ePump working LED (ORANGE pump on light)\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-9\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003eNo flow LED (RED failure light)\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-10\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003e1.5 metre lead and 3 pin Australian\/New Zealand plug\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-11\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003e0.6 metre pump power lead, plug and play\u003c\/td\u003e\n\u003ctd class=\"cv-table-cell-1\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"cv-table-row-12\"\u003e\n\u003ctd class=\"cv-table-cell-0\"\u003eInbuilt 10 bar pressure gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}
Please call our team on 02 9651 4111 to enquire
The White International WHI-SK20PPHS2 & WHI-SK20PPHS2 controllers are devices used to control electric 240V pumps of 1.5kW or less.
The controller monitors both the pressure and the flow. It controls the operation of the pump automatically. Because of its design, there is no need for a separate pressure (expansion) tank, nor is there any need to adjust start and stop pressures as per traditional pressure switches.
The unit will protect the pump should the water supply fail (due to blockage in the pipe or tank running dry) and will automatically restart normal operation once water is restored.
- Starts and stops the pump automatically when the tap is open or closed. This means the pump does not need to be turned off manually.
- Maintains a constant pressure from the pump during operation resulting in a reliable water supply.
- Automatically stops the pump in the situation of no flow (due to inlet pump blockage) and will automatically resume normal operation once the blockage is removed.
- Automatically restarts the pump in the event of power failure. This gives the homeowner peace of mind that the unit will continue to operate even if they are away for a long period of time.
- The controller eliminates pressure fluctuations at flows as low as 1L/min.
- Plug and play leads (IEC type) are installed on the controller so that a licensed electrician is not required to replace the controller.
- The controller incorporates an inbuilt pressure gauge to enable the homeowner to monitor the system pressure without the need of a separate inline pressure gauge. The pressure gauge can also diagnose nuisance upstream water.
- Drinking water AS/NZS4020 approved in Australia and New Zealand.
| Inlet | 1" BSP male |
| Outlet | 1" BSP male |
| Built in non-return valve | No flow/loss of prime protection |
| Manual start switch | Reset button |
| Voltage LED | Green (power "on" light) |
| Pump working LED | Orange (pump "on" light) |
| No flow LED | Red (failure light) |
| Lead and 3 pin Australian/New Zealand plug | 1.5m |
| Pump power lead, plug and play | 0.6m |
| Inbuilt pressure gauge | 10 bar |
