The WHI-SK controllers are devices used to control electric 240V pumps of 1.5kW or less.
The controller monitors both the pressure and the flow. It controls the operation of the pump automatically. Because of its design, there is no need for a separate pressure (expansion) tank, nor is there any need to adjust start and stop pressures as per traditional pressure switches.
The unit will protect the pump should the water supply fail (due to blockage in the pipe or tank running dry) and will automatically restart normal operation once water is restored.
Need a pump sized by an expert? Click on the form below -
Features and Benefits:
Technical Specifications:
Bar: 10 Bar
Brand: White International
Casing Material: Technopolymer
Kilo Watts: 1.5 kW
Port Size Inlet: 1″ BSPM Inlet
Port Size Outlet: 1″ BSPM outlet
Product Type: Pump Controller
Volts: 240 V
Construction Characteristics:
Inlet: 1″ BSP male
Outlet:1″ BSP male
Built in non-return valve
No flow/loss of prime protection
Manual start switch (RESET)
Voltage LED (GREEN power on light)
Pump working LED (ORANGE pump on light)
No flow LED (RED failure light)
1.5 metre lead and 3 pin Australian/New Zealand plug
0.6 metre pump power lead, plug and play
Inbuilt 10 bar pressure gauge
Technical Information
IEC type
Voltage: 220V (-6%) / 240V ( 6%)
Maximum Current: 16(8) Amps
Maximum kW: 1.5kW
Frequency: 50Hz
Ingress Protection: IP65
Maximum Water Temperature: 60 deg C
Starting Pressure: 1.5 bar
Recommended Minimum Pump Pressure Required: 3.0 bar
Maximum Working Pressure: 10 bar
Minimum Flow: 1.0 l/m
AS/NZS4020 Certified
Plug and Play Lead
Pumps or controllers that are AS/NZS 4020 Drinking Water Approved offer peace-of-mind.
This approval ensures that the pump or controller will not contribute any toxic materials or metals to the liquid being pumped, won’t support the growth of micro-organisms and won’t change the taste or appearance of your water.
1 YEAR WARRANTY
The WHI-SK controllers are devices used to control electric 240V pumps of 1.5kW or less.
The controller monitors both the pressure and the flow. It controls the operation of the pump automatically. Because of its design, there is no need for a separate pressure (expansion) tank, nor is there any need to adjust start and stop pressures as per traditional pressure switches.
The unit will protect the pump should the water supply fail (due to blockage in the pipe or tank running dry) and will automatically restart normal operation once water is restored.
Need a pump sized by an expert? Click on the form below -
Features and Benefits:
Technical Specifications:
Bar: 10 Bar
Brand: White International
Casing Material: Technopolymer
Kilo Watts: 1.5 kW
Port Size Inlet: 1″ BSPM Inlet
Port Size Outlet: 1″ BSPM outlet
Product Type: Pump Controller
Volts: 240 V
Construction Characteristics:
Inlet: 1″ BSP male
Outlet:1″ BSP male
Built in non-return valve
No flow/loss of prime protection
Manual start switch (RESET)
Voltage LED (GREEN power on light)
Pump working LED (ORANGE pump on light)
No flow LED (RED failure light)
1.5 metre lead and 3 pin Australian/New Zealand plug
0.6 metre pump power lead, plug and play
Inbuilt 10 bar pressure gauge
Technical Information
IEC type
Voltage: 220V (-6%) / 240V ( 6%)
Maximum Current: 16(8) Amps
Maximum kW: 1.5kW
Frequency: 50Hz
Ingress Protection: IP65
Maximum Water Temperature: 60 deg C
Starting Pressure: 1.5 bar
Recommended Minimum Pump Pressure Required: 3.0 bar
Maximum Working Pressure: 10 bar
Minimum Flow: 1.0 l/m
AS/NZS4020 Certified
Plug and Play Lead
Pumps or controllers that are AS/NZS 4020 Drinking Water Approved offer peace-of-mind.
This approval ensures that the pump or controller will not contribute any toxic materials or metals to the liquid being pumped, won’t support the growth of micro-organisms and won’t change the taste or appearance of your water.
1 YEAR WARRANTY